How to support and fix the bracket tent

How to support and fix the bracket tent

A tent is a very important equipment for people engaged in outdoor activities. Familiar with the method of tent construction can help you not be at a loss when encountering emergencies. The following editor will teach you how to support and fix the bracket tent:

After the tent is rolled out, the four corners of the inner tent should be fixed first, so that the bottom of the tent is laid flat on the ground. If possible, mats can be cushioned under the tent, which can protect the bottom of the tent and achieve the waterproof effect.

When supporting the tent, in addition to the reliable connection with the tent pole, special attention should be paid to pulling the leash to make the tent tight so that the tent is rainproof. The tent with skirt should be well pressed by soft soil or sand in winter. Snow pressure can also be used, which is more conducive to wind protection.

The fixing of the ground nail should have an inclination angle, the angle is preferably 35-45 degrees, the distance and direction of the ground nail into the ground should be on the same axis as the rope, and the rope and the ground nail should be at a 90 degree angle, which is beneficial to achieve the force. strength. Pay attention to the corresponding fixation in the fixing sequence. After the whole tent is fixed, adjust the lanyard to make all aspects of the pulling force consistent.

After setting up the tent, check the distance between the inner and outer tents. If they are stuck together, it will affect the rain protection, so it needs to be adjusted.

The above is the introduction to the support and fixing of the bracket tent introduced by the color stripe cloth manufacturer. I hope it will be helpful to you.