Specifications and colors included in the color strip

Specifications and colors included in the color strip

Introduction to the quality of colored striped cloth! The folding and use of colored striped cloth, the colored striped cloth has light weight, high strength, good flexibility, simple and convenient to use, so it is widely used in our life and production. However, after the colored striped cloth is used up, how to better fold and store it becomes a problem. Unreasonable folding methods will not only affect the effect of the colored striped cloth next time, but also cause a waste of space, so fold it correctly. What is the method? The folding steps will be explained in detail below.

1. "Brand new" polypropylene [double] four-color striped cloth

*Production process: made of polypropylene "new material", wire-drawing weaving, and "double-sided" film coating.

*Weight: 80g/㎡

*Features: windproof, waterproof, high quality

*Usage: Widely used to cover cargo, cover equipment, cover trains, build canopy, building fence, anti-leakage, disposable packaging, waterproof, etc.

*Specifications: (The following dimensions are: width × length, unit: meter)

*Specifications: (The following dimensions are: width × length, unit: meter)

2×100, 3×50, 4×30, 4×50, 5×50, 6×50, 8×18, 8×18.5, 8×30, 10×30, 12×30, 4×45, 6× 45, 8×27, 10×27, 12×27

1. Spread the color stripe cloth flat, pay attention to leaving the two ropes, and then fold the two sides of the color stripe length direction to the longitudinal center line in the middle of the color stripe cloth.

2. Divide the two sides of the folded color strip into three equal parts, and then fold it twice along the longitudinal centerline in the middle.

3. Fold the two sides of the color stripe cloth in the width direction to the horizontal center line of the color stripe cloth surface, and then fold it three times toward the middle longitudinal center line. In this way, the folded color stripe cloth has an area of approximately 1000mm*600mm*300mm.

4. Bind the folded color stripe cloth with the rope reserved in step 1. Both sides of the color stripe cloth should be tied into a cross shape, pay attention to the rope to be tightened, and finally tie the rope and tie the rope end Plug it well to avoid loose rope, rope buckle falling off, rope end dragging, and the best length of the remaining end of the rope end is about 100mm-300mm.

2. "New Material" Polypropylene [Single Film] Color Striped Fabric

*Production process: made of polypropylene "new material", wire-drawing weaving, and "double-sided" film coating.

*Weight: 75g/㎡

*Features: cheap, windproof and waterproof

*Usage: Widely used to cover cargo, cover equipment, cover trains, build canopy, building fence, anti-leakage, disposable packaging, waterproof, etc.

*Specifications: (The following dimensions are: width × length, unit: meter)

2×60, 2×80, 3×40, 3×50, 4×30, 4×40, 4×50, 6×30, 6×40, 6×50, 8×11, 8×18, 8× 25, 8×30, 10×18, 10×25, 10×30, 12×18, 12×25, 12×30.

Bundling of color striped cloth corner ropes in freight: Tighten the two corner ropes at each end of the color striped cloth separately to expand the corners of the color striped cloth into a triangular shape, and then flatten the corners of the color striped cloth and fold it To the end wall of the truck, wrap both ends of the vehicle with color striped cloth tightly, pass through the pressure rope, the hand hook, and the inside of the hand brake lever in turn, so that the corner ropes of the color stripe cloth are tensioned in an X-shape, and are tied to the two trucks. On the T-shaped iron at the end.