How to build a construction tent

How to build a construction tent

Different types of tents have different building methods. Today, the color stripe manufacturer teaches you how to build tents:

1. Clean up the ground After choosing a place to build the tent, you must first clean up the ground, remove all stones, wood, and tree roots, and pay attention to avoid animal caves.

2. Spread the tent on the cleaned ground. Spread the tent in the tent, put the connected tent poles into all the cloth covers, first fix the tent pole on the foot of the inner tent, and then set the tent. The pole bulges upward, and the inner tent is also propped up, and then the other end of the tent pole is fixed to the foot of the other side. After the inner tent is well supported, cover the outer tent, fasten it with a cable, and then check the distance between the inner and outer tents. Do not stick them together. This will affect the warmth and rain protection.

3. Fix the tent

Some tents are designed with metal rings under the four feet, which can be fixed on the ground with ground nails. If the ground is hard, you can find a stone to nail the ground nails. Some tents do not have foot loops, but only pull cords. You can find a few heavier stones to tie the pull cords to the rocks, and then move the stones to make the pull cords tight and ensure that the tension between the cords is even.

4. Drainage and pest control

In possible rainy weather, a circle of drainage ditches should be dug around the tent and the drainage outlets should be arranged at low points. The drainage ditch should be close to the outer edge of the tent to facilitate the timely drainage of rainwater from the tent.

As long as the tent is propped up, the screen windows must be pulled, otherwise there will be a lot of bugs getting in. When entering the tent, be careful not to bring the bugs in. You can coax away the bugs at the door before entering the tent.